Question about fitting a VR-X front on an TW LS

[m00nee]

Question is, I've got access to a written off TL VR-X and am considering putting the body kit on my TW LS AWD

Everything should bolt on OK, but i can't find any wiring for the shark eye spotlights.

Does anyone know if the wiring is there for the spotlights?

The front bumper needs to be repaired, and i don't see the point of spending the money if i can't use the spotlights

Cheers

[Paladin]

I think the TL/W would be the same as the earlier 3rd gens, with only Sports, VRX & Verada's equipped with fog lights and the necessary wiring.

There is a good discussion and how-to here. https://www.aussiemagna.com/forums/sh...ad.php?t=70286

[m00nee]

I think the TL/W would be the same as the earlier 3rd gens, with only Sports, VRX & Verada's equipped with fog lights and the necessary wiring.

There is a good discussion and how-to here. https://www.aussiemagna.com/forums/sh...ad.php?t=70286

Cheers Paladin, that was helpful.

From what i can see all the wiring is in the body loom, but not from the fusebox

[mcs_xi]

Cheers Paladin, that was helpful.

From what i can see all the wiring is in the body loom, but not from the fusebox

Also, VRX fog lamps use the same plug as the high beams in the normal headlight (with the orange seal)

The other models fog lamps use a different plug.

I have fitted a VRX kit to my KL